A few special features of ERGOCUT CB torches:
- Original Italy TRAFIMET plasma torch head
- torch body protected by the outer handle
- highly flexible cables
- electrical safety devices built into the
- handle and easily replaceable, in the event of breakage,
without having to change the whole torch body
- low cost of components
- dimensions and weight reduced up to 30% less than traditional torches
Less electromagnetic disturbance. with consequent absence of problems for any electronic radio television. telephone and computer systems in the vicinity of the cutting positions Greater simplicity in the design and production of generators for plasma cutting.
Less electric stress on the torch-and on the respective connecting cables - due to the absence of the high voltage necessary for striking the arc Greater simplicity in comparison with other torches(without high frequency) on the market. with a consequent decrease of the risks of jamming in the mechanical- pneumatic movement for striking the arc subject to wear (electrodes, tips, nozzles, diffusers etc.)
Thanks to the better cooling of the torch obtained by reducing the insulating thicknesses (without endangering the safety parameters
A striking new design, together with an improved ergonomic handle, makes use of the torch easier and more relaxing A new mechanical safety device -in the operation of the trigger-together with the existing electrical safety device has made these torches some of the safest and most reliable on the market.
Current 40~70Amps
Duty Cycle : 70A 60%
Gas : Air /N2
Gas pressure : 72~80Psi (5.0~5.5Bar)
Gas flow : 220LPM
Post flow time : 45s
Pilot : Electrode to tip
Lngitation : None HF
New Ergonomic Handle
Durable Omron type switch
Durable leather sheath, low temperature and heat resistant main cable
Product independent identification ID number
Technical Data
Standard Length : 4m
Air Pressure : 4.5~5.5bar
Duty Cycle 60% : 30A
Current 40~80Amps
Duty Cycle : 80A 100%
Gas : Air /N2
Gas pressure : 72~80Psi (5.0~5.5Bar)
Gas flow : 180LPM
Post flow time : 45s
Pilot : Electrode to tip
Lngitation : None HF
Current 40~100Amps
Duty Cycle : 100A 100%
Gas : Air /N2
Gas pressure : 70~80Psi (4.6~5.0Bar)
Gas flow : 180LPM
Post flow time : 45s
Pilot : Electrode to tip
Lngitation : None HF
Current 40~120Amps
Duty Cycle : 120A 60%
Gas : Air /N2
Gas pressure : 72~80Psi (5.0~5.5Bar)
Gas flow : 180LPM
Post flow time : 45s
Pilot : Electrode to tip
Lngitation : None HF
Reparability：
In the event of damage to the air guide pipe, during cutting or during operations for changing the spare parts,it is now possible to replace it without having to buy the complete torch head.
Current 40~60Amps
Duty Cycle : 60A 80%
Gas : Air /N2
Gas pressure : 72~80Psi (4.5~5.0Bar)
Gas flow : 150LPM
Post flow time : 45s
Pilot : Electrode to tip
Lngitation : None HF
Less electromagnetic disturbance. with consequent absence of problems for any electronic radio television. telephone and computer systems in the vicinity of the cutting positions Greater simplicity in the design and production of generators for plasma cutting.
Less electric stress on the torch-and on the respective connecting cables - due to the absence of the high voltage necessary for striking the arc Greater simplicity in comparison with other torches(without high frequency) on the market. with a consequent decrease of the risks of jamming in the mechanical- pneumatic movement for striking the arc subject to wear (electrodes, tips, nozzles, diffusers etc.)
Thanks to the better cooling of the torch obtained by reducing the insulating thicknesses (without endangering the safety parameters
A striking new design, together with an improved ergonomic handle, makes use of the torch easier and more relaxing A new mechanical safety device -in the operation of the trigger-together with the existing electrical safety device has made these torches some of the safest and most reliable on the market.
Reparability：
In the event of damage to the air guide pipe, during cutting or during operations for changing the spare parts,it is now possible to replace it without having to buy the complete torch head.
Reparability:
In the event of damage to the air guide pipe, during cutting or during operations for changing the spare parts,it is now possible to replace it without having to buy the complete torch head.